Need to purchase R-net Dongle immediately

No Commercial sellers please, unless of particular interest and with permission!

MAIN WEBSITE: www.wheelchairdriver.com

Need to purchase R-net Dongle immediately

Postby mrdragon1013 » 19 Jul 2020, 07:12

I would prefer it was OEM but for the right price will buy a dealer version and use the workaround. Thank You! :hammer
mrdragon1013
 
Posts: 3
Joined: 16 Jul 2020, 15:58
Location: United States

Re: Need to purchase R-net Dongle immediately

Postby steves1977uk » 19 Jul 2020, 11:16

You need to put your location in your profile as this is an international forum, then members can advise where to buy one from. :thumbup:

Steve
User avatar
steves1977uk
 
Posts: 2980
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Need to purchase R-net Dongle immediately

Postby mrdragon1013 » 20 Jul 2020, 16:12

Thanks I updated the info on profile. I'm in the US
mrdragon1013
 
Posts: 3
Joined: 16 Jul 2020, 15:58
Location: United States

Re: Need to purchase R-net Dongle immediately

Postby gcebiker » 21 Jul 2020, 06:23

:lol: thank heavens its a small country :)
http://greenmobility.com.au/dynamic-controls-3/shark/rc-wheelchair-controller/
My YouTube Ch -- https://www.youtube.com/user/gcebiker
User avatar
gcebiker
 
Posts: 847
Joined: 11 Jul 2015, 14:20
Location: Gold Coast, Queensland, Australia.

Re: Need to purchase R-net Dongle immediately

Postby mrdragon1013 » 21 Jul 2020, 23:23

Got one coming.

Thanks Steve
mrdragon1013
 
Posts: 3
Joined: 16 Jul 2020, 15:58
Location: United States

Re: Need to purchase R-net Dongle immediately

Postby steves1977uk » 22 Jul 2020, 00:22

No problem. :thumbup:

Steve
User avatar
steves1977uk
 
Posts: 2980
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Need to purchase R-net Dongle immediately

Postby Smark67 » 27 Jul 2020, 18:20

steves1977uk wrote:No problem. :thumbup:

Steve


Hi, you wouldn't happen to have an ICS programming cable would you for a Permobil chair?

Cheers,

Mark
Smark67
 
Posts: 190
Joined: 16 Jan 2011, 16:40
Location: Norwich, UK

Re: Need to purchase R-net Dongle immediately

Postby steves1977uk » 29 Jul 2020, 18:45

I don't I'm afraid Mark, as I like my chairs to use just PG Drives stuff without any proprietary modules like Permobil's ICS. :fencing Don't understand what's different between R-Net ISM module and ICS as both do the same thing more or less, except ISM is easier to set up and don't require additional software or cables to program it. That's why I tend to stick with Curtiss-Wright stuff for everything, less hassle. :thumbup:

Steve
User avatar
steves1977uk
 
Posts: 2980
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Need to purchase R-net Dongle immediately

Postby Burgerman » 29 Jul 2020, 20:15

Its also less bulky, more reliable and doesent depend on one off permobil proprietry components or firmware or their own service agent to fix (replace in an attemp to fix) ove and over...

Although some of their seating would require the advanced R-Net seating module rather than the common and cheap ISMs we all know and love. Still, way simpler and smaller than all that permobil junk. Same with their own gyro stability modules. The R-Net ones seem way better if only because we can program them, and adjust them and get hold of them if needed. They are just as good if not better.
User avatar
Burgerman
Site Admin
 
Posts: 50612
Joined: 27 May 2008, 21:24
Location: United Kingdom


Return to Buy/Sell Mobility Equipment

Who is online

Users browsing this forum: No registered users and 10 guests

 

  eXTReMe Tracker