Quickie Groove breaking & Programmer

No Commercial sellers please, unless of particular interest and with permission!

MAIN WEBSITE: www.wheelchairdriver.com

Quickie Groove breaking & Programmer

Postby calabash » 23 Sep 2018, 16:06

Hi all

My quickie groove fitted with a Delphi system finally gave up, or the controller did! I have since bought a quickie salsa r2. The thing is I am not sure if there is any demand for the parts.

It is fitted with 6mph 4 pole motors and they work fine, in fact it all worked fine until half way across a busy main road at 5pm and it stopped!!! Got it home and plugged in the programmer and it is all down to the controller module. It was cheaper and quicker to buy a used chair than try and change over all the electronics.

So the question is does anyone want the motors first of all, if so then I will sell the other smaller bits but the motors really need to go first, no silly money just cheap offers for the bits plus UK postage only.

I also have the hand held programmer that works with the delphi system, that will be sold either here or on ebay but first offered on here if anyone wants it.

All questions answered if I can.
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby steves1977uk » 23 Sep 2018, 23:26

Does your groove have the 10 inch castor forks? I'd be interested if it has.

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Quickie Groove breaking & Programmer

Postby calabash » 24 Sep 2018, 09:51

steves1977uk wrote:Does your groove have the 10 inch castor forks? I'd be interested if it has.

Steve


Hi Steve

Yes it does but first off I would like to get rid of the motors, if I can do that then I would break up the rest, otherwise I will either put the whole thing up for sale or scrap it whole. I will give it a few days and let you know before I stick it on ebay.
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby steves1977uk » 24 Sep 2018, 11:54

Hi calabash,

How much are you asking for the whole chair?

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Quickie Groove breaking & Programmer

Postby calabash » 24 Sep 2018, 12:08

Not a lot steve, make an offer but not to much! I have had my use out of it but I will be keeping the batteries as they are still very good.... programmer not included..
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby Burgerman » 24 Sep 2018, 13:13

You might as well include it, since theres not many delphi systems still in operation. They gave up due to the reliability issues and stopped making delphi years back. Surprised it was still going.
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove breaking & Programmer

Postby steves1977uk » 24 Sep 2018, 16:04

How does £150 sound? I'll have to get a van via Shiply to collect it.

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Quickie Groove breaking & Programmer

Postby calabash » 24 Sep 2018, 16:58

For that I will include the programmer as well, I will send you/post a photo before we make the deal though... check back in a few mins...
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby calabash » 24 Sep 2018, 17:17

Not sure if I have done it right, if not you will see nothing.... Well I did it..
Attachments
Groovesmall.jpg
Groove.... I think.
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby calabash » 24 Sep 2018, 17:18

Also the old hangers and some new bearings for the casters.
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby steves1977uk » 24 Sep 2018, 18:54

That looks in pretty good condition. Do you accept Paypal as payment?

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Quickie Groove breaking & Programmer

Postby calabash » 24 Sep 2018, 19:13

PM sent.
calabash
 
Posts: 118
Joined: 05 Oct 2013, 16:06
Location: Essex. UK

Re: Quickie Groove breaking & Programmer

Postby Burgerman » 24 Sep 2018, 20:29

How on earth is anyone able to drive that with the joystick in a completely impossible position with any degree of control? :cussing
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove breaking & Programmer

Postby steves1977uk » 26 Sep 2018, 12:22

The armrests will be removed as I have no need for them! Might go straight to Lithium on this chair as it weighs 140kg approx without Lead bricks!

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK


Return to Buy/Sell Mobility Equipment

Who is online

Users browsing this forum: No registered users and 36 guests

 

  eXTReMe Tracker