recharge the battery via JOYSTICK !!

[peterik]

Disabling the lock function is not a low battery and therefore it is not possible to charge the battery via JOYSTICK !!
Ovládací modul VR2 Elektrický invalidný vozík, ťažký náklad, Cyrius

[woodygb]

How did you disable the lock function ... did you cut the wrong wire ?

You should cut the wire between pin 2 and pin 3.

[peterik]

The truck must be switched on to activate the lock function. 1. Press the ON / OFF button (1) until the acoustic signal sounds before releasing it again. 2. Swing the joystick forward until you hear a beep, then release it again. 3. Swing back the joystick until you hear a beep, then release it again. 4. The joystick returns to the center position (zero position) and the control module switches itself off with a long beep. Zámku The lock function is activated.

and now the battery is weak so probably not unlock

[woodygb]

The lock function doesn't affect charging.

[peterik]

ta oki