Dynamics DX2-rem420 Help

[maker102]

OK I really feel dumb asking this question. Is it possible to change the boot on a Dynamic Controls DX2-REM420 joystick? Every joystick I have ever messed with started with removing the knob, not this one it seams like it's glued on. Any help would be greatly appreciated.
Thanks. Carl

[Burgerman]

Most just twist and pull... But if that doesent work. All you can do is try warming it up some.

[ex-Gooserider]

I agree w/ BM... It should pull off with sufficient force... If glued, heat can help, but you don't want to cook the pod - I haven't tried it, but I'd be inclined to flip the pod upside down and submerge just the knob in a pot of boiling water for a few minutes to soften any glue...

Another option if you can push the boot down a little would be to grab the shaft w/ a pair of locking needlenose pliers and then apply more force w/ a second pair of locking pliers on the knob....

Last option is the destructive approach, get on the knob w a slitting saw in a Dremel and then split it w/ a screwdriver...

ex-Gooserider