ZXD problem

[martin007]

Last night the ZXD was recharging the batteries in my powerchair.
Today (11 a.m.) they were in flotation stage 0.03 - 0.04
Today (11:45 a.m.) the XZD was off.
The recharge has been completed.
Now the ZXD charger does not start up...

[shirley_hkg]

Press once and see.

[Burgerman]

Also check mains cable is properly connected. Mine needs a good push. Or it also is dead.

[martin007]

Press once and see.

It does not work when pressing.

Also check mains cable is properly connected. Mine needs a good push. Or it also is dead.

How can it die so soon?

[LROBBINS]

Did you check the mains cable? I have the same experience as John on all 3 of mine - that plug needs a hard push in, and manages to easily loosen itself (probably when the PS gets moved even a bit).

[martin007]

I just pushed the power cable connector.
Now it works!

How is it possible for him to get out on his own?
Thanks LROBBINS.

[Burgerman]

Mine do this occasionally. I dont worry about this. As I know whats happening, so nothing serious.

[LROBBINS]

I think that those plugs and sockets are molded with a slight taper. The result is that with any vibration the plug slowly slides out of the socket.