Page 1 of 15
DWIZ-ADAPT
Posted:
05 May 2014, 15:22
by Vitolds
sorry for my bad English.
You can find a diagram of this adapter?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 15:25
by Burgerman
What does it do, what is it from?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 16:30
by woodygb
It's a Hirose connector / adapter from Dynamic .
It's just a straight through adaptor plug.
viewtopic.php?f=2&t=2757&p=45458&hilit=hirose#p45458
Re: DWIZ-ADAPT
Posted:
05 May 2014, 16:36
by Vitolds
this joystick dynamic
how to configure the com port I know I do not have this adapter circuit
Re: DWIZ-ADAPT
Posted:
05 May 2014, 17:08
by woodygb
You could make the leads but you
MUST buy a DWD-OEM-U dongle.
http://www.mobilityscooterpart.com/prod ... php?id=133
Re: DWIZ-ADAPT
Posted:
05 May 2014, 18:08
by rover220
Its for programming dx2/rhino controllers.
Re: DWIZ-ADAPT
Posted:
05 May 2014, 19:59
by Vitolds
I have a program and a key.
This adapter is a scheme, it is not just an adapter.
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:05
by woodygb
So you believe that there is something extra inside the "adapter" ?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:20
by woodygb
This is what I believe it might be....nothing extra ...just cross over wiring.
compilation pic from the thread that I linked to.
- 3hirose dx2.gif (90.71 KiB) Viewed 37988 times
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:39
by Vitolds
sorry for my english. this PC-COM I know that this adapter has something (scheme). it does not work directly with the joystick.
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:40
by Vitolds
the reverse side contact there
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:42
by Vitolds
this way joystick
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:46
by woodygb
Those two wires are inside the joystick pod? .... just the black and green?
The Hirose plug is in the black housing?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:47
by Vitolds
I use the Google translator, sorry. Connection of such
pc
DWIZ-CABLE
DWIZ-ADAPT
Dynamic Shark
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:50
by Vitolds
woodygb wrote:Those two wires are inside the joystick pod? .... just the black and green?
The Hirose plug is in the black housing?
not. I showed the reverse side there are 3 adapter tacts
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:52
by Vitolds
in this thing there is something inside, I do not know
Re: DWIZ-ADAPT
Posted:
05 May 2014, 21:55
by woodygb
Vitolds wrote:in this thing there is something inside, I do not know
I do not believe that there is anything inside except wires ... just cross over connections.
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:01
by woodygb
I need to check again ...you have one of these?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:04
by Vitolds
key has
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:06
by Vitolds
I was given at the time of the adapter I did not disassemble it, he glued. we checked the signals from him in it that is exactly what
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:07
by Vitolds
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:20
by woodygb
This
plugs into joystick
OR to this ....
which plugs into
and then plugs into.
- rhino.gif (19.5 KiB) Viewed 34584 times
Yes?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:41
by Vitolds
you do not understand me
I showed the adapter from both sides
in the adapter has something, it does not work directly with the com port
connects all showed higher
adapter glued, there is no possibility to disassemble. I spoil him, he's not mine.
Re: DWIZ-ADAPT
Posted:
05 May 2014, 22:43
by Vitolds
forget it
I do not need
Re: DWIZ-ADAPT
Posted:
05 May 2014, 23:00
by woodygb
Vitolds wrote:you do not understand me
I showed the adapter from both sides
in the adapter has something, it does not work directly with the com port
connects all showed higher
adapter glued, there is no possibility to disassemble. I spoil him, he's not mine.
Your right ...I do not understand your problem.
You have a problem with making this DWIZ ADAPTOR work?
Re: DWIZ-ADAPT
Posted:
05 May 2014, 23:13
by woodygb
That adaptor probably has a diode in it
The controller that it is used to program has a combined TX & RX wire ( pin 4 ) like the Penny and Giles range...
- RHINO2 DYNAMIC.png (37 KiB) Viewed 34581 times
So ...inside the adaptor could be something like this combining the RX and TX .
pic for Penny and Giles.
Re: DWIZ-ADAPT
Posted:
05 May 2014, 23:39
by woodygb
So ...maybe something like this .
- RHINO2 DYNAMIC2.png (46.09 KiB) Viewed 34581 times
Re: DWIZ-ADAPT
Posted:
06 May 2014, 11:24
by woodygb
This is what I think
might be inside the DWIZ ADAPT.
DWIZ.jpg
Re: DWIZ-ADAPT
Posted:
09 May 2014, 00:16
by Vitolds
this scheme does not work.
if you put an adapter that works.
what is the adapter contraption worth
Re: DWIZ-ADAPT
Posted:
03 May 2015, 00:52
by anubis801
Do not try to unscrew the adapter apart because it will break!
Trust me I know! Fortunately I was able to repair it, but it was a pain in the ass and took me e few hours to do so!
Well the adpter seems to have some circuitry inside with some unknown (no code) IC's a transistor or somthing that looks like it, and a few passive components.
It is NOT just a cross wire connector!
Some magic (electronics) is going on in there.
I am intersted If someone has found a schematic diagram or an equivalent working circuit for this adapter.