myera-rnet software

[sin85]

hi,
i am in process of getting new Meyra Optimus 2 RS edition with r net 120 controller and CJSM2 joystick. In anticipation i purchased Rnet generic OEM programmer and the dongle (cables etc). Does anyone have meyra specific software as I want to firstly remove the moronic 10km per hour Australian restriction and than play with voltage to increase speed past factory set 15 kmh.
thanks

[Burgerman]

You should be able to do this with the Sunrise version. It will likely be limited by max motor voltage setting. So generic wont allow that but several other versions will. See PM.

[sin85]

thanks

[Andrey]

and than play with voltage to increase speed past factory set 15 kmh.

Is this possible with standard controller (rnet 120A)?

[sin85]

and than play with voltage to increase speed past factory set 15 kmh.

Is this possible with standard controller (rnet 120A)?

It should be. my chair is being delivered on thursday , i will tell you then

[Burgerman]

Unless its restricted to suit the rules in a specific market, then it wont be.

[s-car]

Is this possible with standard controller can-bus?

[Burgerman]

Dont understand the question.

[s-car]

Sorry

Can meyra option 2 2.322 with can-bus be 15 khm? motor 950W

[Burgerman]

Dont understand the question.

And still dont!

[Dan]

It looks like hes asking if his chair can be reprogrammed to go faster.
Optimus 2 / Optimus 2 S 2.322
https://www.meyra.com/wheelchairs/produ ... product-47

From the order from it looks like at least the faster versions have the same motors? And speed is set by programming.

Speed Motor performance Range
6 km/h 950W approx. 70 km
*10 km/h 950W approx. 60 km
*15 km/h, factory-adjusted to 12 km/h (can be changed later) 950W approx. 50 km
*Only in combination with 676 rear marking plate or 2676 rear marking tape

The CAN BUS offers a circumferential program of special controls.
It looks like it only comes with an R-NET controller.

Going faster is going to really effect the range which can't be that great already. Does yours have the 107Ah batteries and 12Amp charger?

[s-car]

It looks like hes asking if his chair can be reprogrammed to go faster.
Optimus 2 / Optimus 2 S 2.322
https://www.meyra.com/wheelchairs/produ ... product-47

From the order from it looks like at least the faster versions have the same motors? And speed is set by programming.

Speed Motor performance Range
6 km/h 950W approx. 70 km
*10 km/h 950W approx. 60 km
*15 km/h, factory-adjusted to 12 km/h (can be changed later) 950W approx. 50 km
*Only in combination with 676 rear marking plate or 2676 rear marking tape

The CAN BUS offers a circumferential program of special controls.
It looks like it only comes with an R-NET controller.


Going faster is going to really effect the range which can't be that great already. Does yours have the 107Ah batteries and 12Amp charger?

that this is my question,
thank you

battery 2x https://telit.co.rs/PDFDokumenti/SLA/CW ... 7TnG6f5hjQ
charger 8A

[Dan]

You can get the serial number from the chair and e-mail it to the chairs manufacture, they should have all the info on it. Or the dealer it was bought from.
The order form says something about "676 rear marking plate or 2676 rear marking tape" being the faster version.
R-net programmers are not cheap.
You should send a private message to the original poster of this topic sin85 I'm sure he would be able to help more.

[s-car]

You can get the serial number from the chair and e-mail it to the chairs manufacture, they should have all the info on it. Or the dealer it was bought from.
The order form says something about "676 rear marking plate or 2676 rear marking tape" being the faster version.
R-net programmers are not cheap.
You should send a private message to the original poster of this topic sin85 I'm sure he would be able to help more.

Thanks