R-net programmer

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

R-net programmer

Postby Es* » 18 Feb 2018, 00:28

Hello,

I've got a project chair that got totally stalled by me getting pneumonia and glandular fever... so I'm currently using a secondhand ebay chair which I've modified a bit. My previous chair is unuseable and while much of it I don't miss at all, the ability to move at height and to turn round corners at speeds higher than 0.6kph I am missing acutely. The programming is driving me to distraction. Does anyone have an R-net programmer (OEM) which they'd let me borrow for £/beer/unending gratefulness? Happy to travel to pretty much anywhere in the UK, and perhaps even outside. I am a desperate woman!

E
Es*
 
Posts: 134
Joined: 17 May 2012, 23:46

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 00:33

Where are you? Many of us have programmers but are hundreds of miles, or full continents apart!
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby steves1977uk » 18 Feb 2018, 00:36

Quite a few of us on here have R-Net Programmers, where abouts are you?

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: R-net programmer

Postby Es* » 18 Feb 2018, 00:37

I'm in Cambridge but will travel if necessary! Also if someone can help me get one then even better...
Es*
 
Posts: 134
Joined: 17 May 2012, 23:46

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 00:38

I THINK she is miles away in devon...

State / Region England
District / County Devon
City Whitestone
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 00:39

Cambridge? 200 miles away.

Nobody should ever buy a chair they do not have an OEM level programmer for!
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby Es* » 18 Feb 2018, 00:42

I would travel 200 miles if necessary... I mean, I'd prefer not to, but I will... Anyone closer got one I could use?
Es*
 
Posts: 134
Joined: 17 May 2012, 23:46

Re: R-net programmer

Postby Es* » 18 Feb 2018, 00:43

Burgerman wrote:Cambridge? 200 miles away.

Nobody should ever buy a chair they do not have an OEM level programmer for!


All very well but no one should ever be stuck in bed and unable to go to their paid job either... so needs must... it was/is something of a stop gap. Chair can be bought on ebay, seating modified at home. OEM programmer cannot be bought online or easily at all.
Es*
 
Posts: 134
Joined: 17 May 2012, 23:46

Re: R-net programmer

Postby steves1977uk » 18 Feb 2018, 00:53

Cambridge is about 100 miles from me, so I'm probably the closest to you.

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: R-net programmer

Postby Es* » 18 Feb 2018, 00:55

Awesome - thanks. I'll drop you a PM later in the week presuming that I don't get any even closer offers.
BM - where are you based - just in case you happen to be near somewhere I know I'm going in the next few months?
Es*
 
Posts: 134
Joined: 17 May 2012, 23:46

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 01:03

Grimsby, hull, east coast.
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby Es* » 18 Feb 2018, 01:11

It seems that OEM programmers cluster next to the sea! Thanks, both.
Es*
 
Posts: 134
Joined: 17 May 2012, 23:46

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 01:53

So do most people generally! Its where all the ports, industry and fish are. Or were till the stupids joined the EU. Unless you count all those pro eu dictatorship left wing multiculturalist soft southerners in what used to be our capital.

Its not just a programmer you need but someone that understands it, and some time.
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby rover220 » 18 Feb 2018, 07:05

About 100 miles from me also
rover220
 
Posts: 1846
Joined: 10 Dec 2013, 19:34
Location: West Mids, UK

Re: R-net programmer

Postby steves1977uk » 18 Feb 2018, 12:05

BM, would it be good idea to have thread made sticky that list people/their location who have a programmer and which systems they can program? I can do both Pilot+ and R-Net.

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 13:20

I can do all PG stuff and Dynamic stuff. To OEM or better level. Also have a roll on weigh-bridge...
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby rover220 » 18 Feb 2018, 14:09

steves1977uk wrote:BM, would it be good idea to have thread made sticky that list people/their location who have a programmer and which systems they can program? I can do both Pilot+ and R-Net.

Steve


Good idea.
rover220
 
Posts: 1846
Joined: 10 Dec 2013, 19:34
Location: West Mids, UK

Re: R-net programmer

Postby Burgerman » 18 Feb 2018, 17:17

Other than page 1 is going to be all stickies!
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-net programmer

Postby ex-Gooserider » 20 Feb 2018, 02:31

Metro-Boston MA, Pilot+ OEM, hand held for old Invacare (MKIV, possibly MK V?)

Ex-Gooserider
T-5, ASIA-B
Jazzy 1100
Jazzy Select 6
Quickie Q-7
Invacare Mariner
Want to make / get a better chair, ideally one that stands.
User avatar
ex-Gooserider
 
Posts: 5962
Joined: 15 Feb 2011, 06:17
Location: Billerica, MA. USA


Return to Everything Powerchair

Who is online

Users browsing this forum: No registered users and 228 guests

 

  eXTReMe Tracker