ZXD2400 modification guild 3Kw 0-60V 0-50A

[shirley_hkg]

Ask williamclark77

[Pennismightier]

I don't... but my mom does. For the past few months I've been doing research on upgrades for her chair to increase her independence by increasing her travel distance & time through increased battery life, lower weight, & decreased charge times. Found this forum when i fell into the internet rabbit hole looking for rapid chargers. I spent the last few days reading through this whole thread, the translated modification instruction pages, manual for unmodified rectifier, etc... and came to the conclusion that this was the best choice of chargers since it has adjustable voltage, amps, & charge phases making it capable of charging pretty much any battery chemistry.

[martin007]

Ask williamclark77

That seems to be manufactured with a 3D printer.
I don't have a 3D printer.

> https://item.taobao.com/item.htm?id=544251656554

Where can I find the most modern version?
I mean the one that has pushbutton replacing the roulette.

I wanted...

[Burgerman]

There are many with printers here. And will himself. That will post to you.

[Burgerman]

I don't... but my mom does. For the past few months I've been doing research on upgrades for her chair to increase her independence by increasing her travel distance & time through increased battery life, lower weight, & decreased charge times. Found this forum when i fell into the internet rabbit hole looking for rapid chargers. I spent the last few days reading through this whole thread, the translated modification instruction pages, manual for unmodified rectifier, etc... and came to the conclusion that this was the best choice of chargers since it has adjustable voltage, amps, & charge phases making it capable of charging pretty much any battery chemistry.

We mostly use it here to power the PL8 charger for lithium ion phosphate batteries.

If you want shirley to see this, you might PM him about buying. But he does it as a favour to us here. So no garantees!

[martin007]

There are many with printers here. And will himself. That will post to you.

I don't understand you.

[Burgerman]

How else can I say it?

Will, can print one for you. And send it by mail. So could anyone with a printer. For e.g. I had a part printed and sent to me by a member here recently.

You only need email a file for the part to someone with a printer!

[steves1977uk]

I believe Irving and Terry have 3d printers too BM, I might get one in the future.

Steve

[martin007]

How else can I say it?

Will, can print one for you. And send it by mail. So could anyone with a printer. For e.g. I had a part printed and sent to me by a member here recently.

You only need email a file for the part to someone with a printer!

Now i understand.

[Burgerman]

There are literally millions of parts for everything you can imagine at a few websites that you can use to download a file that lets you dend it to a local printing service. Every town has these today. And many hobbyists do it too. I downloaded a part for my RC transmitter and irvive was good enough to print it for me. Twice! At a small price to cover his time, trouble, materials.

One such site is thingverse. https://www.thingiverse.com/

Take a look!

[martin007]

> https://item.taobao.com/item.htm?id=544251656554

Kit conversion v4.3

I think there's a more up-to-date model.
I see him somewhere but I don't remember where.

[Burgerman]

But you wont be doing the conversion. Shirley buys them already done.

[martin007]

If you used to be right, but I think there were two options...

shirley_hkg!

Help us a little.

[shirley_hkg]

You'll need 3 buttons

↓ ⇔ ↑

not just two.

[shirley_hkg]

viewtopic.php?f=2&t=7670&start=780

[martin007]

New version ; knob-less, with touch sensor .

Link (in Taobao) to the kit?

[martin007]

shirley_hkg!!!!!!!!!!!

Where Are you?


I want to make a purchase.

---------------------------------------------------------------------------------------------------------------------------
ZXD2400 PSU (new) 0-60V 0-50A (220 v)

-----------------------------------------------------------------------------------------------------------------------------
KIT

Spare part.
------------------------------------------------------------------------------------------------------------------
ALS0S2AW

> https://item.taobao.com/item.htm?spm=a2 ... 3460043974
-----------------------------------------------------------------------------------------------------------------------------------

[martin007]

[Burgerman]

You mean you cant read it?

See if the same thing can be found on aliexpress or other auction sites in english.

https://www.aliexpress.com/wholesale?ca ... romagnetic

[shirley_hkg]

Still a lockdown here , and price of psu soars 50%

[martin007]

Still a lockdown here , and price of psu soars 50%

How much does the PSU cost now?

[Burgerman]

Its hard to know. Because shipping etc. And we dont understand chinese or HK money!

But mine was cheap even if 50% more. But that was a long time ago. So cant say now.

[shirley_hkg]

This may be my last offer of ZXD2400 in aluminum case.

Cosmetics not perfect. Dent on corners due to rough shipping.

I absorb the recent price increase , so selling with old price tag.

Let me know.

[Burgerman]

Looks like its been used in one of your riots. I wish you lots of luck dealing with the chinese there seriously. Thats a totalitarian communist government and you will lose all your rights and freedom. Boris says you can come to the UK.

[shirley_hkg]

I and my wife do have BNO.

Let's not talk about the cold and damp of UK.

How long can we survive there, with £1M cash and monthly pension of £4K ?

[stevelawiw]

Do you only have the one? I think Martin007 is quite keen to have one! But I would like one too if possible.

[Burgerman]

You can survive indefinitely.
1m cash will buy 4 houses like mine. 4 beds, 2 bathrooms, 1 shower/wet room large open kitchen, large living room, plenty space inside and out, detached, near town centre/parks etc.
And 4k a month is way more than you need to live twice over and then some!

The chinese are going after Taiwan too now.

[shirley_hkg]

How much can you get from letting a house like yours ?

[Burgerman]

Estate agent says 800 to1200 a month 4 bedrooms. The one across the road is rented out for £950 month. 3 bedrooms.

[biscuit]

Assuming you mean Hong Kong dollars, 1m is really not enough money for 4 houses in Lincolnshire. Maybe 4 cowsheds in the Hebrides. But if you mean £ sterling, that is a good amount. No doubt the Chinese government would not allow it out of the country though.

Wear warm clothes. But in fact the weather is unexpectedly pleasant.