Omni + 2 BT mouse modules

[takuorawa]

Hi,

Is there a way to get 2 mouse modules work with one set of external switches?

the setup i have is:
-Omni screen
-One mini joystick with white and red 3,5 jack...
-On/Off switch connected to omni
-Mode switch connected to omni
-BT Mouse Module 1 for PC
-BT Mouse Module 2 for Android tablet

and i'm trying to have switch for left and right click, for both mouse modules..
When using a splitted cable (Y-cable) to connect module 1 external switch 1 and module 2 external switch 1 the switch does nothing..

Is there a way to have just one external switch to work with both modules?

[rover220]

to my knowledge what you want isnt possible. have you tried using nudges instead?

[Smark67]

I have similar setup with R-net (don't really know Omni) but PC BT & Android BT are two separate modes on my controller (along with different speed settings, positioning etc).

[takuorawa]

Thanks,

The nudges are now enabled and set to a 1000ms. This seems to be a very good way

First the nudges was so quick, or set at a 100ms and when i tried to "click" the mouse cursor would also move.

[rover220]

Thanks,

The nudges are now enabled and set to a 1000ms. This seems to be a very good way

First the nudges was so quick, or set at a 100ms and when i tried to "click" the mouse cursor would also move.

good stuff