looking for reference of a controler

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

looking for reference of a controler

Postby elyoFr » 22 Jul 2019, 17:48

Hi every one !

I'm looking for any information, refrence, bluesheet or else about this kind of controler :

Image

Image
Image

I know it's a bit difficult but my vendor don't answer ... ;(
elyoFr
 
Posts: 13
Joined: 26 Aug 2018, 17:50
Location: Saint pierre de Mons

Re: looking for reference of a controler

Postby woodygb » 22 Jul 2019, 17:52

Pic of chair or make of chair?
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7070
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: looking for reference of a controler

Postby Burgerman » 22 Jul 2019, 17:57

Never saw one before. But its a similar shape to dynamics shark. But non of those have a screen do they?
User avatar
Burgerman
Site Admin
 
Posts: 65243
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: looking for reference of a controler

Postby elyoFr » 22 Jul 2019, 20:51

woodygb wrote:Pic of chair or make of chair?


Image
the seller is ACEKARE but i suspect the producer is
http://kaidao-care.com/

in the user manual it's said that the controler is a dual drive Rocker 24v dc 2*12A. and i can't found anything else :(
elyoFr
 
Posts: 13
Joined: 26 Aug 2018, 17:50
Location: Saint pierre de Mons

Re: looking for reference of a controler

Postby Burgerman » 22 Jul 2019, 21:01

Its some weird chinese one. I doubt you will get hold of a programmer.
User avatar
Burgerman
Site Admin
 
Posts: 65243
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: looking for reference of a controler

Postby elyoFr » 22 Jul 2019, 21:33

Burgerman wrote:Its some weird chinese one. I doubt you will get hold of a programmer.

sold in france as a revolution :( but the plastics are cheap and i have only electronic wich is working ...
elyoFr
 
Posts: 13
Joined: 26 Aug 2018, 17:50
Location: Saint pierre de Mons

Re: looking for reference of a controler

Postby Burgerman » 22 Jul 2019, 21:55

That chair, and many slight variations are sold all over the world under different brand names. They cannot use a normal controller as it uses brushless motors. So they made one, or used one made by some chinese company that I dont recognise. So you will find it extremely hard to get hold of a programmer, if one exists.
User avatar
Burgerman
Site Admin
 
Posts: 65243
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: looking for reference of a controler

Postby ex-Gooserider » 23 Jul 2019, 00:43

If you search on Ali Baba or other China site for brushless chair motors, you will find lots of vendors selling kits of motors and controllers - at least some also list programmers.... No idea if the programmers are anything like OEM, or just Dealer level... Also I have no idea about if they would work with the OP's chair or not...

I might consider trying to find a controller that looks like the one in the picture, and then send the vendor a message asking if their programmer would work - and if they will give some sort of warranty that it works...

ex-Gooserider
T-5, ASIA-B
Jazzy 1100
Jazzy Select 6
Quickie Q-7
Invacare Mariner
Want to make / get a better chair, ideally one that stands.
User avatar
ex-Gooserider
 
Posts: 5966
Joined: 15 Feb 2011, 06:17
Location: Billerica, MA. USA

Re: looking for reference of a controler

Postby Burgerman » 23 Jul 2019, 01:29

Even if it does work. I doubt its very well developed, knowing the years of testing and modification needed to get this stuff right. So at best there will be a few basic things that can be adjusted. I doubt it will be like the stuff we are used to.
User avatar
Burgerman
Site Admin
 
Posts: 65243
Joined: 27 May 2008, 21:24
Location: United Kingdom


Return to Everything Powerchair

Who is online

Users browsing this forum: DrewDigital, Pierro and 50 guests

 

  eXTReMe Tracker