Puma 40 - Motor Brushes (8mm)

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Puma 40 - Motor Brushes (8mm)

Postby Big Cat » 10 Sep 2019, 18:12

Hi All

I am a heavy user of a Puma 40 which is now 6 years old. It is in excellent condition but I have just received a quote for two 8mm motor brushes £84.00 RRP each.

I am sure that I replaced these on my previous chair, a Storm X, about 10 years ago and they only cost me around £20.00 for the pair.

Any advice or where I can get these would be greatly appreciated.

Thanks

Big Cat
Big Cat
 
Posts: 1
Joined: 10 Sep 2019, 17:46

Re: Puma 40 - Motor Brushes (8mm)

Postby ex-Gooserider » 01 Oct 2019, 06:39

Go-to place for motor bits in the US is Eurton Electrics.... You may need to find more detailed info on the motors - brand of the MOTOR manufacturer, their model numbers, etc....

Worst case would be pull a brush and carefully measure (calipers at a minimum, preferably micrometer) the brush and find something that matches...

Their tech support people are reasonably good, but would need as much info as you can give them.

ex-Gooserider
T-5, ASIA-B
Jazzy 1100
Jazzy Select 6
Quickie Q-7
Invacare Mariner
Want to make / get a better chair, ideally one that stands.
User avatar
ex-Gooserider
 
Posts: 5260
Joined: 15 Feb 2011, 06:17
Location: Billerica, MA. USA


Return to Everything Powerchair

Who is online

Users browsing this forum: hank, ICEUK and 20 guests

 

  eXTReMe Tracker