Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Powerchair or Mobility Equipment Reviews! Start a new thread with DESCRIPTIVE TITLE for each new review.

WEBSITE REVIEWS HERE (Scroll Down): www.wheelchairdriver.com/powerchair-stuff.htm

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby Burgerman » 21 Jan 2018, 21:26

Beware any lithium system that doesent at least increase capacity by 30% and that uses a dumb charger and a BMS. Because a) you wont get the added range that you likely expect and b) there will be reliability issues sooner or later and it wont last...
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby FelipeOliveira » 09 May 2022, 21:28

Good afternoon ! could someone guide me what might be happening, Quantum Q6 “CONFIGURING NETWORK” I didn't find this information in any manual I consulted!
Attachments
0DA10F01-5E3F-4B55-A449-440FCEC42F93.jpeg
0DA10F01-5E3F-4B55-A449-440FCEC42F93.jpeg (29.51 KiB) Viewed 2382 times
FelipeOliveira
 
Posts: 161
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby woodygb » 10 May 2022, 09:11

Q-logic 3e.

https://www.pridemobility.com/pdf/owner ... boi_om.pdf

Page 17


Item that indicates that the system modules are being configured. Shows animated
bar below.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby FelipeOliveira » 11 May 2022, 09:33

woodygb wrote:Q-logic 3e.

https://www.pridemobility.com/pdf/owner ... boi_om.pdf

Page 17


Item that indicates that the system modules are being configured. Shows animated
bar below.



good morning woody. Thank you for your help. now, it's indicating. “ Error Code 20 SW Fault: wrong profile version
of remote device” unfortunately the chair is not here with me yet, but it will be soon!! Is there any function, like reset? or restore ?
FelipeOliveira
 
Posts: 161
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby woodygb » 11 May 2022, 10:17

https://www.pridemobility.com/pdf/owner ... ogic-3.pdf

The error code seems to indicate a bad connection or defective batteries.

Edit ...Whoops! ...Wrong Q-Logic .

This seems to be the error .

http://javafoundry.com/home/Q-Logic_Tec ... Manual.pdf

20 SW Fault: Wrong profile version of remote device
Incompatible module connected.
Remove incompatible module or update the software.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby woodygb » 11 May 2022, 10:25

I have no real idea how you update or reset the software on Prides Q-Logic.

Here is the blurb from the pdf.

The PCPS also has additional capabilities, including: saving/restoring sets of parameters to/from disk, updating
Q-Logic software, and programming IR remote controls.
For more information, see the instructions included with the PCPS software.


Have you got the 1314 PCPS Software and CanBus programming cable?
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby FelipeOliveira » 11 May 2022, 10:39

FelipeOliveira wrote:
woodygb wrote:Q-logic 3e.

https://www.pridemobility.com/pdf/owner ... boi_om.pdf

Page 17


Item that indicates that the system modules are being configured. Shows animated
bar below.



good morning woody. Thank you for your help. now, it's indicating. “ Error Code 20 SW Fault: wrong profile version
of remote device” unfortunately the chair is not here with me yet, but it will be soon!! Is there any function, like reset? or restore ?


good morning woody. Thank you for your help. now, it's indicating. “ Error Code 20 SW Fault: wrong profile version
of remote device” unfortunately the chair is not here with me yet, but it will be soon!! Is there any function, like reset? or restoration ?
FelipeOliveira
 
Posts: 161
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby Burgerman » 11 May 2022, 10:40

That only works properly with the non Q-Logic (meaning non pride versions of the curtis controllers) I think. Pride like permobil have a "branded" version. Which is mostly compatible with q-logic 1 , not compatible with a lot of the stuff that is on qlogic 2 and 3... So it may not even connect, and if it does will be missing much of the settings and options, and may not talk to all of the modules.

So be careful what you do. I never played with this myself though, prefering generic R-Net as that always just works.
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby FelipeOliveira » 11 May 2022, 10:45

woodygb wrote:I have no real idea how you update or reset the software on Prides Q-Logic.

I have the one you helped me with about 3 years ago and I never used it again lol. but anyway I have to wait for the client to bring it to me.

Here is the blurb from the pdf.

The PCPS also has additional capabilities, including: saving/restoring sets of parameters to/from disk, updating
Q-Logic software, and programming IR remote controls.
For more information, see the instructions included with the PCPS software.


Have you got the 1314 PCPS Software and CanBus programming cable?
FelipeOliveira
 
Posts: 161
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby FelipeOliveira » 11 May 2022, 10:52

woodygb wrote:I have no real idea how you update or reset the software on Prides Q-Logic.

thanks again !!! I will study these PDFs, while the chair is not enough. it will be perfect, she arrives and I already have the solution!!


Here is the blurb from the pdf.

The PCPS also has additional capabilities, including: saving/restoring sets of parameters to/from disk, updating
Q-Logic software, and programming IR remote controls.
For more information, see the instructions included with the PCPS software.


Have you got the 1314 PCPS Software and CanBus programming cable?
FelipeOliveira
 
Posts: 161
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby FelipeOliveira » 11 May 2022, 11:08

woodygb wrote:https://www.pridemobility.com/pdf/owners_manuals/operation_instructions/fault_list-q-logic-3.pdf
Code 20
The error code seems to indicate a bad connection or defective batteries.

Edit ...Whoops! ...Wrong Q-Logic .

This seems to be the error .

http://javafoundry.com/home/Q-Logic_Tec ... Manual.pdf

20 SW Fault: Wrong profile version of remote device
Incompatible module connected.
Remove incompatible module or update the software.
Attachments
2592AE4D-61FE-465B-9D43-796B8EB4FDCD.jpeg
FelipeOliveira
 
Posts: 161
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: Are The Q6 Edge and Q6 Edge 2 Good Chairs?

Postby fabrasil » 21 Mar 2024, 17:18

Felipe,

Did you solved that?

Fabio
fabrasil
 
Posts: 25
Joined: 22 Mar 2022, 00:02

PreviousNext

Return to Powerchair Reviews

Who is online

Users browsing this forum: No registered users and 144 guests

cron

 

  eXTReMe Tracker