by ex-Gooserider » 15 Nov 2016, 00:42
I don't know if it still applies, but the directions for the MKIV controller make a big deal about being sure the chair has the drive wheels off the ground and solidly supported... I haven't tried the procedure (yet) but the manual says that it spins the wheels back and forth at various speeds, so you need to be sure they can turn and that the chair is on a solid enough support not to fall off while the test is running....
ex-Gooserider
T-5, ASIA-B
Jazzy 1100
Jazzy Select 6
Quickie Q-7
Invacare Mariner
Want to make / get a better chair, ideally one that stands.