by Burgerman » 02 Mar 2019, 00:17
You mean that as usual its configured way too nose heavy because they have improved it by making the front too narrow. And so you cant move the seat back or the wheels and newly offered centre footplate collide. 1 step forwards.2 back... And so the same problem as rear drive + swing away over the castors. You are then forced to have the seat set in a position that puts all the weight over the casters. They really are numpties that must love to shoot themselves in the foot. Dont any of them think this stuff through?
The salsa or groove, with the seat moved back, and a centre plate that places your heels between the caster wheels, allows that, is great once programmed, ONLY because the caster wheels are far enough apart to allow that to be done. Yet those chairs as stock are also almost unusable and have long swing away footplates ahead of the casters. They just dont get it. Worse, they also dont get that with a heavy front, that they caused, the 8mph motors dont have adequate torque and just cannot ever work properly. And even that is also made worse yet again, by limiting it to both the 90A controller with 6mph, usually as well as the usual STUPID hovercraft style programming. That has walls put in place especially so 99% of users cant ever fix it!!!
Total numpties.