by Burgerman » 27 Jan 2012, 23:15
Turn it on by switching on the power supply, while holding down the mode or enter button. Cant ever remember which. It will tell you the version and ask if you want to do a factory reset. Which you do.
Then you need to uninstall any old version of the software suite.
Then reinstall the version I gave you.
Then power up everything, and make a NEW shortcut adding a BT in its parameters. Only use this shortcut to start the program.
In the taskbar there will in windows 7 be a blue icon - if so click it and choose add device. If not then you need to do the same add bluetooth device in the control panel. Or devices and printers.
When it asks add without a password. It will ad TWO com ports in Device manager. Right click and disable the one with the highest port number.
Now, you restart the hyperion program.
When you restart the hyperion software it will sooner or later ask for a pasword. Only then use 1234, 1111, or whatever came with your BT card. Make sure the hyperion is close to the PC to begin with. Then the PC and charger are forever paired.
(Added. The USB CABLE will not work unless the board is unplugged.) Dont flash unless you use the USB cable! You may permenantly kill the charger.
Once all sorted it just finds it and works automatically, and led stops flashing as soon as you start the hyperion software. It restarts if it goes out of range, or when you stop the software.