Programming leads

No Commercial sellers please, unless of particular interest and with permission!

MAIN WEBSITE: www.wheelchairdriver.com

Re: Programming leads

Postby woodygb » 07 Aug 2022, 16:26

dieseldog wrote:Been a while since ive been on here but thank you for those links woody going to make a cable for the mothers new chair. Any links to the software would be greatly appreciated.


You have a private message.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby bob_viv » 11 Aug 2022, 10:20

Hi Woody, i purchased an s-drive programming cable from you a while back, which has served me well. I now need to program my latest scooter through the charging port. is it possible that you can give me the pinout for the charge port programming. i.e. connections on the four pin plug that i have go to which pins on the round charging port.
Thanks in advance,
Bob.
bob_viv
 
Posts: 15
Joined: 25 Oct 2019, 15:37
Location: Nottingham UK

Re: Programming leads

Postby woodygb » 11 Aug 2022, 10:25

Here you go ....
Are you certain that your new scooter uses an S-Drive?

.
3 pin molex.jpg
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby bob_viv » 11 Aug 2022, 14:21

Yes, for sure, cheers
Thanks a lot and best regards
Bob.
bob_viv
 
Posts: 15
Joined: 25 Oct 2019, 15:37
Location: Nottingham UK

Re: Programming leads

Postby DoctorFinlay » 20 Oct 2022, 14:53

Hi,
I have a Sterling S700 scooter which I bought second hand. How would I go about purchasing leads to program the S Drive unit inside? Any info about software would also be greatly appreciated. Many thanks.
DoctorFinlay
 
Posts: 2
Joined: 11 Oct 2022, 16:47

Re: Programming leads

Postby woodygb » 20 Oct 2022, 15:02

I can supply you with a lead or it is possible to construct one yourself.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby DoctorFinlay » 21 Oct 2022, 07:20

woodygb wrote:I can supply you with a lead or it is possible to construct one yourself.


If you could supply me with a lead that would be great, please let me know how much and how to pay. Thank you.
DoctorFinlay
 
Posts: 2
Joined: 11 Oct 2022, 16:47

Re: Programming leads

Postby Jadams » 19 Jan 2023, 11:47

Hi Woody,

I bought one of your leads around June of 2021. worked perfectly for my S-Drive conversion on a Sterling diamond mobility scooter, I have recently bought a Drive sport rider with a Rhino2 controller, firstly, could the same lead be used to program? and secondly, I believe I would need the dynamics wizard software to do this, I know there is a "modified" version somewhere, does this negate the need for the dongle?

jeff.
Jadams
 
Posts: 10
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: Programming leads

Postby woodygb » 19 Jan 2023, 12:15

Hi Jeff,

The S-drive lead is NOT compatible with the Rhino2.

The hacked Wizard software doesn't require a dongle.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby Jadams » 20 Jan 2023, 12:14

Hi Woody,

Thanks, is it possible to make up the leads and obtain the software?

the delay when starting and acceleration is so poor, it's embarrassing when someone lets you cross and looks like you're taking the mick.

jeff.
Jadams
 
Posts: 10
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: Programming leads

Postby Jadams » 20 Jan 2023, 12:42

I already have USB to serial adapters and a true COM port available.

jeff
Jadams
 
Posts: 10
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: Programming leads

Postby woodygb » 20 Jan 2023, 13:07

The parts that you already have will not help.

I can however make you an interface that will do both the S-Drive ( plus VR2 , Vsi ,Pilot+ , Egris and SOLO ) and the Dynamic Rhino2 / Shark...A switch is used to select which make either PGDT or Dynamic .
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby Jadams » 20 Jan 2023, 16:55

What's the cost Please

jeff
Jadams
 
Posts: 10
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: Programming leads

Postby woodygb » 20 Jan 2023, 18:09

£35 incl postage ...payment once I have one made.

It will however take me a little time to complete one as I do not think that I have all the parts kicking around, so I may need to order some.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby Jadams » 20 Jan 2023, 19:22

Perfect Woody,

Can we do that then please?

Jeff
Jadams
 
Posts: 10
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: Programming leads

Postby woodygb » 20 Jan 2023, 20:20

:thumbup:
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Programming leads

Postby woodygb » 27 Jan 2023, 00:03

Jadams wrote:Perfect Woody,

Can we do that then please?

Jeff


Jeff , I have one ready for you.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6952
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Previous

Return to Buy/Sell Mobility Equipment

Who is online

Users browsing this forum: No registered users and 7 guests

 

  eXTReMe Tracker