rnet omni and omni2

[rover220]

got brand new unused omni and the new omni2 available.

useful when fitting special controls or remote control interfaces.

[Burgerman]

How much?

Might be interested in whatever is cheapest. For RC of chairs. But skint right now, council tax, and just bought new camera/lens

[rover220]

How much?

Might be interested in whatever is cheapest. For RC of chairs. But skint right now, council tax, and just bought new camera/lens

£120 Inc post for original and £250 Inc for omni2.

[martin007]

Are there any photographs?

[rover220]

Still got these....

[acid_coke]

Does the Omni 2 consist of multiple parts?

[rover220]

Does the Omni 2 consist of multiple parts?

Yep, input section, display and cable.

[rover220]

still available

[eizbear]

I may be interested in the Omni2 if it is still available. I recently bought a backup wheelchair for my son, a invacare Tdx sp2. It has Dynamic LiNX on it. I first intended to get hold of a REM500, but having big trouble finding that unit.

Just need to figure out what more than the Omni2 I need in order to convert the chair to r-net?

[Burgerman]

You need 3 things.
Joystick.
Power module.
Lighting and seating module.

And 2 bus cables, and a means of programming it all correctly. That means a easy to get dealer dongle and some workarounds and software that is quite easy to find around here!

Also read this thread. I did the same very cheaply.
Now have 3 complete sets of R-Net systems to retrofit 3 full rehab powerchairs. Inc all cables etc. Less than 1k the lot.
https://www.wheelchairdriver.com/board/ ... f=2&t=8857

[rover220]

I can supply all that is required if you convert.