WheelchairDriver

Hi folks

Still trying to get my scooter working again since last October. Have not been able to find a D50770.03 controller.

I found a D51272.06, was told it would work. Bought it, put it in, the LED bar blinks 7 times & repeats. When pulling the FORWARD lever, the scooter slowly goes backward. When pulling the REVERSE lever, the scooter slowly goes forward. When plugging in the charger, the LED bar should normally scroll from left to right- it now does nothing. Curtiss Wright says it cannot be reprogrammed to work as a D50770.03. Seller wont accept returns.

Anyone got the right controller?

Thanks

-Brian

Dont know what the numbers mean. But as long as its a scooter controller it can be configured to work, and it should be programable.

Its likely that the only issues are programming. And that you need to swap it so that it isnt expecting an on board charger or some other inhibit. Maybe one that slows it when turning. And it needs either the wires swapping where it is connected, or reprogramming so that it does the right thing with the levers.

But that requires a programmer, and a little knowledge. Any scooter power module will work with any scooter once configured correctly. Ask woody about a programmer.