Curtiss 1208-C controller

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Curtiss 1208-C controller

Postby mrgus2u » 27 Jun 2022, 06:03

Any info on programming this one is appreciated.
Can it be programmed with the 1314 software? Or do i need the hand programmer? Is there a Curtiss controller, but microprocessor based, that can replace it without changing the harness?
mrgus2u
 
Posts: 12
Joined: 16 Jun 2022, 19:31
Location: Hollywood, Florida

Re: Curtiss 1208-C controller

Postby woodygb » 27 Jun 2022, 10:46

As far as I am aware the 1208 is not programmable.

http://liftpartsrus.com/Controls-all/1208%20Manual.pdf

Replacing it with a another make / model will entail changing the part of the wiring loom that plugs into the controller.

The Curtis 1228 or a Penny & Giles ( Curtiss Wright ) S-Drive are both suitable replacements.


https://cdn.curtisinstruments.com/produ ... eet_en.pdf

https://davilot2.ccvshop.nl/Files/10/26 ... manual.pdf
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6868
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Curtiss 1208-C controller

Postby woodygb » 27 Jun 2022, 15:32

You can easily modify a 24pin ATX plug to fit either of the above mentioned controllers by cutting off just one end ....you will of course need to wire this in place of the 1208 plug.

atx plug mod.jpg
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6868
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Curtiss 1208-C controller

Postby mrgus2u » 28 Jun 2022, 04:20

Thanks Woody. You are the Oracle of motor control. :thumbup:
mrgus2u
 
Posts: 12
Joined: 16 Jun 2022, 19:31
Location: Hollywood, Florida

Re: Curtiss 1208-C controller

Postby martin007 » 28 Jun 2022, 23:08

woodygb wrote:As far as I am aware the 1208 is not programmable.

http://liftpartsrus.com/Controls-all/1208%20Manual.pdf

Replacing it with a another make / model will entail changing the part of the wiring loom that plugs into the controller.

The Curtis 1228 or a Penny & Giles ( Curtiss Wright ) S-Drive are both suitable replacements.


https://cdn.curtisinstruments.com/produ ... eet_en.pdf

https://davilot2.ccvshop.nl/Files/10/26 ... manual.pdf


Where do you get these manuals from?
I'm interested in all that exist.
I want to form a library.
User avatar
martin007
 
Posts: 2180
Joined: 03 Jun 2015, 23:55
Location: Spain

Re: Curtiss 1208-C controller

Postby woodygb » 28 Jun 2022, 23:13

Where do you get these manuals from?
....I simply search the web.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6868
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Curtiss 1208-C controller

Postby martin007 » 28 Jun 2022, 23:16

woodygb wrote:
Where do you get these manuals from?
....I simply search the web.


On Google?
User avatar
martin007
 
Posts: 2180
Joined: 03 Jun 2015, 23:55
Location: Spain

Re: Curtiss 1208-C controller

Postby woodygb » 28 Jun 2022, 23:18

Yes ..Google.

Formatting the search correctly helps e.g.

search pgdt s-drive pdf

https://www.google.co.uk/search?q=pgdt+ ... nt=gws-wiz

or pgdt s-drive manual pdf

https://www.google.co.uk/search?q=pgdt+ ... nt=gws-wiz
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6868
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Curtiss 1208-C controller

Postby martin007 » 28 Jun 2022, 23:19

OK.
User avatar
martin007
 
Posts: 2180
Joined: 03 Jun 2015, 23:55
Location: Spain

Re: Curtiss 1208-C controller

Postby woodygb » 28 Jun 2022, 23:28

pride q-logic manual pdf

https://www.google.co.uk/search?q=pride ... nt=gws-wiz

enAble50 manual pdf ... ( A Curtis product often relabeled )

https://www.google.co.uk/search?q=enAbl ... nt=gws-wiz

enAble40 manual pdf ... ( A Curtis product often relabeled )
https://www.google.co.uk/search?q=enAbl ... nt=gws-wiz
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6868
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Curtiss 1208-C controller

Postby FelipeOliveira » 03 Jul 2022, 09:12

mrgus2u wrote:Any info on programming this one is appreciated.
Can it be programmed with the 1314 software? Or do i need the hand programmer? Is there a Curtiss controller, but microprocessor based, that can replace it without changing the harness?

what exactly do you need? any specific information? or everything? what model of scooter is the PMC 1208c installed?
FelipeOliveira
 
Posts: 93
Joined: 27 Dec 2014, 02:25
Location: Brasil


Return to Everything Powerchair

Who is online

Users browsing this forum: JMGarage, shirley_hkg and 8 guests

cron

 

  eXTReMe Tracker