Careful proper assembly such as lictite or grease in the correct places is the big thing that no manufacturer does. And it does many good things. For e.g your squeek... If theres movement and its not loctited to prevent it, or greased to stop wear then it frets, and wears and gets worse over time. Doesnt mattery if this is bearings in housings, motor casing and gearbox or mounting bolts, wheels or seating parts or whatever. This is why I usually strip everything on a new chair and assemble with care, and loctite blue or red or bearing loctite (depending on what it is), run loom and cable tie everything correctly, and check EVERYTHING over thoroughly.
Yes its a pain. And takes time. But its an investment in your future problems and frustrations. Of course in the same way that I can spot a rented house at half a mile because its not their property, so they dont do anything at all that causes them any effort or cost. The same happens to chairs. I am getting an NHS chair soon. I will not be doing the same thing to that. Because its not "mine" or should I say not my problem. I will use it and when it fails, I will ring them to sort it out.
You treat things that you buy £££ with your own cash and that you have to replace very differently. Which is another reason the Socialist NHS is an inefficient money pit. Please note I cant spell innneffficient.