PINNED - Info on PROGRAMMING PGDT and others

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Frogeye » 27 Mar 2021, 10:03

looking at the picture above, and assuming +24v is required... wouldn't you be right with pin 1 molex to pin 2 xlr (GND) AND pin 2 molex to Pin 1 XLR (+24v)??
Frogeye
 
Posts: 4
Joined: 27 Mar 2021, 07:03

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby woodygb » 27 Mar 2021, 10:29

s-drive wiring programming cable noel.jpg


MOLEX PIN 1 GND --- XLR PIN 2
MOLEX PIN 2 24V+ --- XLR PIN 1
MOLEX PINS (3 & 4) ---- XLR PIN 3
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6377
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Frogeye » 27 Mar 2021, 10:32

Awesome!
Many thanks for your help Woody :)
Frogeye
 
Posts: 4
Joined: 27 Mar 2021, 07:03

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Francoisc » 12 May 2021, 01:09

Damm I try to make mi programming cable but you have minimum 4 different diagram with different valu for résistance and diode which one is the right one for s200a contrôler
Francoisc
 
Posts: 3
Joined: 11 May 2021, 23:13

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby woodygb » 12 May 2021, 07:04

Try this one.
more plugs pgdt 2.jpg
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6377
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Francoisc » 12 May 2021, 12:58

Thanks woodygb
Francoisc
 
Posts: 3
Joined: 11 May 2021, 23:13

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Jadams » 12 May 2021, 15:23

Hi Everyone

I am looking at cable options to try and program my 120amp controller, I am reasonably lucky in a sense that I possess a true rs232 port on m PC. is it possible to use this port to build a cable and I assume I would still need the diode and resistor?

cheers in advance

Jeff
Jadams
 
Posts: 4
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Burgerman » 12 May 2021, 17:01

Dynamic DX2 or LiNX or PG Drives R-net?
User avatar
Burgerman
Site Admin
 
Posts: 54806
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby woodygb » 12 May 2021, 19:47

Burgerman wrote:Dynamic DX2 or LiNX or PG Drives R-net?


S-drive

viewtopic.php?f=2&t=3461&p=171902#p171902
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6377
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Brassick » Yesterday, 19:29

Can the PGDT software be used on the Curtis Instruements
model 1212-xxxx controllers? And infact are the S-Drive and the 1212 the same thing but built by different companies under license?
Thanks Nick
Brassick
 
Posts: 5
Joined: 07 May 2021, 14:43

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby woodygb » Yesterday, 19:38

Brassick wrote:Can the PGDT software be used on the Curtis Instruements
model 1212-xxxx controllers? And infact are the S-Drive and the 1212 the same thing but built by different companies under license?
Thanks Nick
COMPLETELY DIFFERENT!

Software
https://www.nocoev.com/curtis/Software%201314-4401/
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6377
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Darrell_LeRoy » Today, 04:23

I have an ASUS laptop that doesn't have any com ports (serial ports), just USB ports.
When I start Mobility Programmer_OEM_Std_14_6_0, I get the error "Unable to Open Serial Port".
I have tried everything I can think of. Added legacy (Communication Port) hardware in Device Manager. Tried all I/O and IRQ combinations.
Tried all Ports. I am at a loss. Please help.
Darrell_LeRoy
 
Posts: 2
Joined: 08 May 2021, 22:54

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby woodygb » Today, 11:03

Ah!.... The Software will not FIND the correct Com Port YOU need to tell the software the port number that the USB lead has been assigned.

Open Windows Device Manager and see what Com Port number has been Assigned to your lead.

To complicate matters the com port number assigned to your lead by WINDOWS must be between 1 & 8 inclusive ...if it isn't YOU must re-assign an appropriate number to it.

NOTE:- You do NOT need to muck around with ANY settings , other than perhaps the actual Com Port number assigned by Windows to your lead.

Follow the pic guide below ...

BIKER.jpg
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6377
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby Darrell_LeRoy » Today, 18:15

Device Manager.jpg
When I go to Device Manager there is no way to set the com port. (See Device Manager.png)
When I go to the program I get the com port error on all eight choices. (See Programm.png)
I can add Ports (Com & LPT) to Device Manager by clicking the Action menu, but I can't enable them.
Attachments
Programm.jpg
Darrell_LeRoy
 
Posts: 2
Joined: 08 May 2021, 22:54

Re: PINNED - Info on PROGRAMMING PGDT and others

Postby woodygb » 9 minutes ago

Darrell , what programming lead do you have?

You do understand that you cannot program the controller without a programming lead ?
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 6377
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Previous

Return to Everything Powerchair

Who is online

Users browsing this forum: DannyB, Darrell_LeRoy, duke1, Google [Bot], GusGf, rover220, Seajays, woodygb and 25 guests

 

  eXTReMe Tracker