Where to find PGDT programmer software

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Re: Where to find PGDT programmer software

Postby Mikeclayton » 22 Mar 2021, 19:10

Hello! I am also among the many in search for the software. Making the cable now. :)

Thank you in advance!
Mikeclayton
 
Posts: 1
Joined: 02 Dec 2019, 14:16

Re: Where to find PGDT programmer software

Postby Burgerman » 22 Mar 2021, 19:34

See PM
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Where to find PGDT programmer software

Postby Bianko16 » 25 Mar 2021, 16:18

Hi all!
I’m making an electric scooter for my grandson by using the motor and other thinks recovered from a weelchair broken...
The driver unit is a S-drive 120A and I try to reprogramming it by using the software pg with dealer mode, but the function that I need to change are not mentioned with the dealer privilege...
I read in some post that there are the o.e.m and manufacture privilege for the software, someone has this software or can help me to found it? Thank you in Advance
Bianko16
 
Posts: 2
Joined: 25 Mar 2021, 16:07

Re: Where to find PGDT programmer software

Postby Burgerman » 25 Mar 2021, 17:43

Not sure about scooters, if woodygb doesent sort you out then I will have a look!
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Where to find PGDT programmer software

Postby woodygb » 25 Mar 2021, 17:45

Burgerman wrote:Not sure about scooters, if woodygb doesent sort you out then I will have a look!

I will send a P.M.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Where to find PGDT programmer software

Postby tetsu » 22 Apr 2021, 14:46

Good afternoon,


I am also interested in having a look at the software. Do you happen to have a link to it?

Thanks a lot in advance!
tetsu
 
Posts: 1
Joined: 15 Apr 2021, 18:31

Re: Where to find PGDT programmer software

Postby Jadams » 07 May 2021, 15:12

Hi Guys, new to the forum.

I have a mobility scooter, namely a Sterling Diamond. Had far to many issues to mention but mainly the original controller has been repaired twice (both braking issues) over the last 2 years, and yet again, the controller has gone (all different errors). I have lost faith in the Pihsiang controller, so I am converting the motor drive and electronics to the S-Drive (120amp). I will be fitting it to my original motor and brake assembly, and would like to know if it is possible that someone could please send me the PC programmer software, as I will need to alter the configuration for braking/de-acceleration, reverse, buzzer etc.

your help would be very much appreciated

Jeff
Jadams
 
Posts: 10
Joined: 06 May 2021, 20:55
Location: Thornton-Cleveleys

Re: Where to find PGDT programmer software

Postby woodygb » 07 May 2021, 16:07

You have mail.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Where to find PGDT programmer software

Postby clatello » 11 May 2021, 14:49

Hello,
I'm looking for the OEM software to programming a PG Drives Technology S drive controller.
Can anyone help me?

Thanks, Jens
clatello
 
Posts: 1
Joined: 11 May 2021, 14:40

Re: Where to find PGDT programmer software

Postby woodygb » 11 May 2021, 15:18

Check your messages
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Where to find PGDT programmer software

Postby Francoisc » 11 May 2021, 23:51

Goo day I have s-drive s200a controler and un searching for the right program to config ,the robotic shop send me the dealer version but I’m not sur if the right one I need to configure the parameter can you help
Francoisc
 
Posts: 3
Joined: 11 May 2021, 23:13

Re: Where to find PGDT programmer software

Postby woodygb » 12 May 2021, 14:18

NOTE:- The software requires YOU to designate the CORRECT Coms Port and the Com Port number assigned to the programming lead MUST be between 1 & 8 inclusive.

The software may initially complain that it is
unable to open serial port


Follow the pic ...click Continue ...click Tools ..then Comms

BIKER.jpg
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Where to find PGDT programmer software

Postby Olivier » 25 May 2021, 02:53

Where to find Pc mobility programmer software for m'y wheelchair?. :thumbup: thanks
Olivier
 
Posts: 1
Joined: 25 May 2021, 02:04

Re: Where to find PGDT programmer software

Postby Burgerman » 25 May 2021, 08:14

Check PM
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Where to find PGDT programmer software

Postby Aidan378 » 07 Jun 2021, 09:11

Where I can the programmer has everybody a Link ? Thank you
Aidan378
 
Posts: 1
Joined: 07 Jun 2021, 09:06

Re: Where to find PGDT programmer software

Postby Stern-300E24V » 21 Jun 2021, 10:40

Hello people,
my name is Joerg (short version of Georg) and I come from Germany.
At first, sorry for my pour English !!

I have an Problem with an "invalid Chairs" from my Mother.
So i want to change the Controller, because i think the old one is defect (Faulty Motor Connection but the Connection and Motor is okay !). I have an other Controller (S-Drive S140) from a friend, but i need to "reprogramm" it (e.g. Throttle Type, Motor-Parameters etc.)

I tried to fix this by a wheelchair service near me. But they does not have the equipment to do this (or they dont know what i wont :-( ). So I try this way.
To Solder the Cable is not the Problem, thanks for all the Information here in the Forum !! But i couldn`t find the OEM Programmer Software, only the Dealer Version :-(

Can someone help me ? :worship :worship

Best Regrads
Joerg
Stern-300E24V
 
Posts: 6
Joined: 21 Jun 2021, 10:21

Re: Where to find PGDT programmer software

Postby Burgerman » 21 Jun 2021, 10:59

Who manufactures your control system?
What exactly is the controller?
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Where to find PGDT programmer software

Postby Stern-300E24V » 21 Jun 2021, 11:14

Hi,
the Controller is a PG Drive Systems D51140.04, in the Documentation they are Called "S-Drive 140".
Because its a PG Controller, i asked here for the Software tho reprogramm it. I can get the Params for the Motor also from the Documentation from the "inavlid Chair".
Stern-300E24V
 
Posts: 6
Joined: 21 Jun 2021, 10:21

Re: Where to find PGDT programmer software

Postby Burgerman » 21 Jun 2021, 11:31

Does that need industrial or standard programmer? Best to wait for woodygb I know almost nothing about scooters.
User avatar
Burgerman
Site Admin
 
Posts: 65050
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Where to find PGDT programmer software

Postby Stern-300E24V » 21 Jun 2021, 11:35

czy i dont know, i think the Industrial (OEM), i think the "Standard" is the Dealer Version an can not change these Params....... so will wait for Woody :worship
Stern-300E24V
 
Posts: 6
Joined: 21 Jun 2021, 10:21

Re: Where to find PGDT programmer software

Postby woodygb » 21 Jun 2021, 11:48

Joerg ... There are 4 levels of mobility software User , Dealer ,OEM and Manufacturer.... there might also be a FACTORY LEVEL.

There is also some software called INDUSTRIAL , this software suits a small sub set of industrial controllers that are sometimes used on mobility scooters.

You want the Mobility Software .

Check your messages.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Where to find PGDT programmer software

Postby Stern-300E24V » 21 Jun 2021, 12:27

Hey, cheers Thanks very Much !!!

One Question: is this the Correct Wiring ?
Stern-300E24V
 
Posts: 6
Joined: 21 Jun 2021, 10:21

Re: Where to find PGDT programmer software

Postby woodygb » 21 Jun 2021, 13:22

Yes ....here is the latest that uses a Schottky diode

download/file.php?id=15638&mode=view
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Re: Where to find PGDT programmer software

Postby Stern-300E24V » 21 Jun 2021, 13:29

You`r the Best !! :worship :worship
I will try it with an CP2101 USB to RS232 and an 1N5819, because: i have both items here....... i will report...
Stern-300E24V
 
Posts: 6
Joined: 21 Jun 2021, 10:21

Re: Where to find PGDT programmer software

Postby steves1977uk » 21 Jun 2021, 16:18

PGDT released version 14.8 for Dealers. Anyone got the OEM or Manufacturing version of 14.8 please?

Steve
User avatar
steves1977uk
 
Posts: 4318
Joined: 20 Oct 2011, 21:47
Location: Wells next the Sea, Norfolk, UK

Re: Where to find PGDT programmer software

Postby Stern-300E24V » 29 Jun 2021, 06:09

Thanks for Your Help and for all the Information here in the Forum !
The new Controller works now, and my Mom means, its driving a littel bit faster as with the old one ?!? I read the Params form the Old Controller and wrote it to the new one, i changed nothing..... Dosn`t matter, it works !
The Cable (Link somerwhere here in this Thread) works and the CP2101 works also with this Cable and Controller !
Stern-300E24V
 
Posts: 6
Joined: 21 Jun 2021, 10:21

Re: Where to find PGDT programmer software

Postby berkayemin3 » 14 Jul 2021, 14:11

So where can I find PG Drive mobility programmer ?
berkayemin3
 
Posts: 1
Joined: 14 Jul 2021, 14:05

Re: Where to find PGDT programmer software

Postby kityweels » 15 Jul 2021, 18:32

hi everyone
I have a AFIKIM BREEZ with a SOLO D50960/1, and a AFIKIM S4 with a S-DRIVE D51446.05 controller.
I need the OEM software in order to program them, and as written before, I guess I need the "INDUSTRIAL software"...?
will it be good for both?
where can I get it?
thanks
Yoav
kityweels
 
Posts: 5
Joined: 15 Jul 2021, 17:20

Re: Where to find PGDT programmer software

Postby marc.rudorfer » 27 Aug 2021, 15:12

Hello @ all I have a S-Drive too and I need to change a few parameters but I only have the dealer software and so I have not many options to set.

The cable works fine ( I read about it. in this forum and made one that works really perfect) ;)

Only the problem I need the right software for setting all up right

I hope someone can help me to find the software

regards from Germany

Marc ;)
marc.rudorfer
 
Posts: 4
Joined: 27 Aug 2021, 15:05

Re: Where to find PGDT programmer software

Postby woodygb » 27 Aug 2021, 15:54

Check your messages.
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 7068
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

PreviousNext

Return to Everything Powerchair

Who is online

Users browsing this forum: LROBBINS, woodygb and 64 guests

 

  eXTReMe Tracker