R-Net PC Programmer OEM

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Re: R-Net PC Programmer OEM

Postby Burgerman » 17 Aug 2021, 19:29

Thanks for the upload.

So it appears that the power module is programmed to only work with the permobil module for stability plugged in and working. As all the normal speed settings are set to 100 or 50. And instead you program the chair on the permobil stability nonsense thingy. If thats not working you will need to disconnect it and convert it to "normal" programming. I know that works as I have copied my sunrise profiles to 2 bought 120A Permobil power modules and they are now "normal"...
So your best bet is to use either of these two profiles. Or junk the permobil parts and convert it to a normal power module. So no permobil ESP settings.

But I cant say how good or bad that will work as turn acceleration, turn deceleration, minimum turn acceleration, and minimum turn deceleration all see way way too low to me. I wouldnt be able to hit a doorway that way. On both profles. But at least you know they work.
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby Burgerman » 18 Aug 2021, 23:03

FelipeOliveira i think a bit of a translation ptoblem here.
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby FelipeOliveira » 19 Aug 2021, 02:28

Burgerman wrote:FelipeOliveira i think a bit of a translation ptoblem here.


translated:

I agree ! I write in Portuguese (Brazil) and translate, and send!
If I post in Portuguese directly, the translation would be better?


Portuguese:

Concordo ! Escrevo em Portugues (Brasil) e traduzo , e envio !
Será q se eu postar em portugues direto a tradução ai ficaria melhor ?
FelipeOliveira
 
Posts: 93
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: R-Net PC Programmer OEM

Postby Burgerman » 19 Aug 2021, 02:41

Unfortunately no. Because I have to run it through the same translation program!
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby FelipeOliveira » 19 Aug 2021, 04:08

Burgerman wrote:Unfortunately no. Because I have to run it through the same translation program!



è that You have no idea or appear when I put it to translate what you write .. kkkkk
FelipeOliveira
 
Posts: 93
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: R-Net PC Programmer OEM

Postby Burgerman » 19 Aug 2021, 09:13

?? Quite! czy :problem:
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby FelipeOliveira » 20 Aug 2021, 06:23

Burgerman wrote:?? Quite! czy :problem:

good night burgerman . after much insistence, I managed to identify . exactly the “ESP”. replaces and it was possible to drive! now I just need to understand how to adjust and adjust the actuators and sensors, if possible disable the limit sensors and "ESP"
FelipeOliveira
 
Posts: 93
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: R-Net PC Programmer OEM

Postby Burgerman » 20 Aug 2021, 08:10

The ESP on a permobil is actually their own stability module used instead of the r-net parts.
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby FelipeOliveira » 20 Aug 2021, 19:57

Burgerman wrote:The ESP on a permobil is actually their own stability module used instead of the r-net parts.

Is it possible to disable it?
FelipeOliveira
 
Posts: 93
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: R-Net PC Programmer OEM

Postby Burgerman » 20 Aug 2021, 20:00

On a permobil its all part of their non r-net system/firmware and seating stuff. I dont know what it will do if you unplug the whole thing. Probably lose that part of the menu, and revert to normal speed settings that make sense.

Dont know as I dont have a permobil (by choice for exactly these reasons). Try it.
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby garethmitchelson » 27 Aug 2021, 13:20

Could anyone please give a link to sunrise r-net OEM pc programmer software .Thank you.
garethmitchelson
 
Posts: 1
Joined: 27 Aug 2021, 12:41

Re: R-Net PC Programmer OEM

Postby FelipeOliveira » 27 Aug 2021, 13:50

garethmitchelson wrote:Could anyone please give a link to sunrise r-net OEM pc programmer software .Thank you.

https://powersoccershop.com/pcprogrammer.aspx
bought mine, last month, OEM (Type B)
Attachments
E3B62136-E3C3-4164-A8C7-AF965C97B413.jpeg
FelipeOliveira
 
Posts: 93
Joined: 27 Dec 2014, 02:25
Location: Brasil

Re: R-Net PC Programmer OEM

Postby kashmiri » 04 Sep 2021, 23:19

garethmitchelson wrote:Could anyone please give a link to sunrise r-net OEM pc programmer software .Thank you.


I don't have the OEM version, but a dealer version can be downloaded from https://amylior.com/software/
kashmiri
 
Posts: 2
Joined: 03 Apr 2013, 09:53
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby Burgerman » 04 Sep 2021, 23:27

But we do have it here!
Also the OEM can be downloaded from the Dietz wheelchair website.
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby kashmiri » 04 Sep 2021, 23:42

Burgerman wrote:But we do have it here!
Also the OEM can be downloaded from the Dietz wheelchair website.


Cheers man! Now only need the dongle, lol.
kashmiri
 
Posts: 2
Joined: 03 Apr 2013, 09:53
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby Burgerman » 04 Sep 2021, 23:52

No you dont!

PM me...
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby rapkar1 » 08 Dec 2021, 11:06

Looking for a DONGLE R-Net DEALER.
Where to buy at a good price?
Anyone have for sale?
rapkar1
 
Posts: 3
Joined: 03 Dec 2021, 22:46
Location: Poland

Re: R-Net PC Programmer OEM

Postby Burgerman » 08 Dec 2021, 13:16

Why dealer? Those are available from any wheelchair dealer or direct from pgdt. Its the OEM dongle that is hard to get.
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby rapkar1 » 08 Dec 2021, 22:28

dealer because it is cheaper, and it is enough to upload the parameters saved in the oem version, right?
Getting it for a reasonable price is probably not as easy as you write. I found the cheapest one for 490 Eur. Does it really cost that much?
Maybe someone has a used for sale?
rapkar1
 
Posts: 3
Joined: 03 Dec 2021, 22:46
Location: Poland

Re: R-Net PC Programmer OEM

Postby Burgerman » 08 Dec 2021, 23:11

Usually it s cheaper.

Sunrise medical retail price is:

Article no.: 108532
Description: R-Net PC programmer (dealer version), inclusive USB cable
Remark: Supplied with software, dongle and cable
List price: £ 254.93
User avatar
Burgerman
Site Admin
 
Posts: 60060
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: R-Net PC Programmer OEM

Postby rapkar1 » 08 Dec 2021, 23:22

thanks, sent the inquiry
rapkar1
 
Posts: 3
Joined: 03 Dec 2021, 22:46
Location: Poland

Previous

Return to Everything Powerchair

Who is online

Users browsing this forum: acid_coke, biscuit, Burgerman, martin007, Porkchops, saker98, terryfielder, woodygb and 18 guests

 

  eXTReMe Tracker