Page 1 of 1

Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 04 Feb 2025, 12:03
by sergey0
Hello, I need some help. Does anyone here on the forum have the original config for R-Net on the Sunrise Quickie Q700 UP M? (This model has a stand-up function and a lift.)

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 04 Feb 2025, 14:51
by Burgerman
I have the non up one.

Sunrise can email it too you.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 04 Feb 2025, 15:16
by sergey0
Thanks

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 04 Feb 2025, 15:22
by Burgerman
They wil ask for serial number as here are many configurations.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 09 Feb 2025, 21:34
by sergey0
I send to international@sunrisemedical.de, kundenservice@sunrisemedical.de
This text:
Hello, my Power Module for the Sunrise Quickie Q700 UP M burned out. I purchased a new controller. Please send me the configuration file for my wheelchair so I can upload it to the controller.
Ident-Nr: 203175211528523
FIN-Nr: 7UPM1814872
A photo of the nameplate is attached.
Thank you!

There's no answer

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 09 Feb 2025, 21:49
by Burgerman
Well call them!

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 10 Feb 2025, 15:45
by sergey0
It is no longer possible to make calls from Russia; our country is under sanctions. Europe has blocked calls from Russia.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 10 Feb 2025, 16:36
by Burgerman
Well thats wht happens when you go around bombing people and shooting them. Yes not your fault, politicians. Putin. He is destroying your country too.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 10 Feb 2025, 19:10
by sergey0
Burgerman wrote:Well thats wht happens when you go around bombing people and shooting them. Yes not your fault, politicians. Putin. He is destroying your country too.

I’m not going to argue with you, just take a look at this picture, and I don’t want to make any claims. We are people with disabilities, not politicians. I do not support any wars (for example, like Israel and the Gaza Sector).
And I don't want to argue here or discuss global issues. I reached out for help to solve my personal everyday problem.
If you feel it's necessary, help me. If you disagree, I’m not going to argue with your point of view - I see no point in it. Every country has its own historical truth. There are other forums and platforms for discussing history and geopolitics.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 10 Feb 2025, 20:02
by Burgerman
I do not support any wars (for example, like Israel and the Gaza Sector).

Well you should. Israel were attacked yet again by people that have sworn to wipe them off the map. Repeatedly. The same people that have been murdering other less devout muslims across the middle east for 14 centuries. They say that they should, based on their book, their ideology. Apostates, athiests, xstians, are all their sworn enemy. They hate jews. So they want them dead.
They said that they will do it all over again. You cant sleep with a rabid dog.

I personally would help you. Or anyone. But I dont know how. That chair uses some fancy seating programming and seating positional sensors etc. And I cant help. I could program one from scratch, from zero. If the chair was in front of me.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 11 Feb 2025, 15:13
by sergey0
Burgerman wrote:I personally would help you. Or anyone. But I dont know how. That chair uses some fancy seating programming and seating positional sensors etc. And I cant help. I could program one from scratch, from zero. If the chair was in front of me.

I need the factory R-Net configuration. I provided the serial number and part number above. If you want to help, as you suggested, call Sunrise and request the configuration file.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 12 Feb 2025, 06:41
by ICEUK
sergey0 wrote:Hello, I need some help. Does anyone here on the forum have the original config for R-Net on the Sunrise Quickie Q700 UP M? (This model has a stand-up function and a lift.)


Hi, I can provide you with the config file for the JIVE UP chair,

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 12 Feb 2025, 13:51
by sergey0
Thank you!

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 12 Feb 2025, 16:27
by sergey0
This power wheelchair was purchased from an official Sunrise dealer.

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 13 Feb 2025, 11:00
by sergey0
Thank you!

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 13 Feb 2025, 11:17
by sergey0
Purchased in Germany

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 13 Feb 2025, 13:11
by Burgerman
PM me

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 13 Feb 2025, 15:37
by sergey0
Answered. See PM

Re: Request R-Net config for Sunrise Quickie Q700 UP M

PostPosted: 14 Feb 2025, 05:04
by Burgerman
FIN-Nr: 7UPM1814872

Means Q700 UP MID etc. So thats definitely a mid drive standing chair number...